Wireless Remote Receiver Otari decks that use the CR-705A (CB-102) wired remote

Last updated June 18, 2021

Otari CR-705A wireless is $70 when purchased direct (or on eBay for $75). Comes with wireless remote receiver unit, preprogrammed universal remote and AC adapter. Shipping is $10 within the US or $25 outside the US. Contact me at scott@revoxremotes.com

Wireless remote adapter for Otari decks that use the CR-705A (CB-102) wired remote. Will work with the Otari MTR-10-2, MTR-10-4, MTR-10II, MTR-10II-C, MTR-12, MTR-12II-I, MX-5050 (no suffix, 8SHD, QXHD, B2HD, BQII, BII2, B2F & MkIII-4) I may have left out a couple decks. Look at the back of the deck for the brick red 12-pin cinch jones connector. Like the original CR-705A this wireless adapter controls the following functions: Record, Play, Stop, Rewind and F.Fwd.

Also Available:
Wireless remote adapter for Otari decks that use the Otari CB-127 wired remote. Will work with the Otari MTR-15, MX-50, MX-50N-II, MX-55, MX-55N, MX5050 BIII-2, MX-5050 MkIV decks. Plugs into the 37-pin D-sub connector on the back of the deck. Controls Play, Stop, Fast Forward, Rewind, Record and Lifter.

Wireless remote adapter for Otari decks that use the Otari CB-110 wired remote. Will work with the Otari MX-5050 MkIII 8-track deck. Plugs into the 50-pin blue connector on the back of the deck. Controls Play, Stop, Fast Forward, Rewind and Record.

Contact me if you are interested. My email address is scott@revoxremotes.com

Maker of wireless remote adapters for vintage tape decks. Remote adapters are also available for Aiwa, Akai, Ampex, Crown, Denon, Nakamichi, Otari, Pioneer, Revox, Sony, Studer, Tandberg, Tascam, Teac and Technics decks.