Instructions for setting up the

One For All URC3220

3 Component Universal Remote Control

This is not one of favorite remotes because it only supports Sony VHS VCR. It does not support Beta, 8mm or Laser Disc.

1) Find the Component Code number for the desired Device from the table below.

Component Code
Sony Beta VCR
Sony 8mm VCR
0032 or 1232
Sony LDP

2) Press and release the DVD/VCR button.

3) On the One For All remote press and hold the SET button until the red light blinks twice, then release.

4) Enter the four digit Component Code on the remotes number pad. If done correctly the red light should blink twice on the last digit. If done incorrectly the red light will flash only once on the last digit.

The VCR preset should now be set.

The full instruction manual for this remote located here --> One For All URC3220 Manual

The complete list of Component Codes for this remote is located here --> One For All URC3220 Codes