Instructions for setting up the

Sony RM-VZ320

7 Component Universal Remote Control

1) Find the Component Code number for the desired Device from the table below.

Component Code
Sony Beta VCR
Sony 8mm VCR
Sony LDP


2) On the Sony RM-VZ320 remote press and hold the SET button in the upper left corner. After three seconds the red light will come on and stay on. Don't release the SET button yet.

3) Press the VCR button and then release both the SET button and the VCR button. The red light will stay on.

4) Enter the five digit Component Code on the remotes number pad. The red light will blink three times and then go out.

The VCR preset should now be set.

The full instruction manual with Component Codes for this remote is located here --> Sony RM-VZ320 Manual